China Yuyao Jinqiu Plastic Mould Co., Ltd. Company cases

Good package of moulds for our customer

What can be seen in the photo is that the moulds we have completed packaging are placed in the waiting area. These moulds are orders from a customer who has cooperated with us for many years, here include injection moulds and blowing moulds. All the export moulds are usually transported by sea or by air. No matter what kind of transportation way, we use fumigation free composite plates to make solid wooden boxes to ensure that the moulds will not be damaged due to collision during transportation. If the mold is transported by air, we will add a base plate at the bottom of the wooden box which meet air freight request. This kind package we are made more than 20years and get customers' approval.

analysis test samples for customer mould

This is the samples we had after we tested the customer's fliptop cap mould on the injection molding machine. After 24 hours of complete cooling and shrinkage, we are measuring on the relevant test equipment whether the dimension and appearance of the sample meet the drawing size standard range or not. Normally we will check key point size such as diameter, height, wall thickness, button depth, thread diameter and other kep size influence fitment with bottle neck, appearance check whether have any strach, deformation and if injection full enough or not, check leakage or not and other items if customer have special request. After analysis if the samples are passed mean we can send to customer for check and the mould are ok for deliver, but if have problem we will going to improve the mould and test again till get good samples for our customer

testing mould check situation for customer

We are testing the mold for the customer's fliptop cap mould, after the mould finished we will arrange to test it on the injection molding machine. In this way to check whether the mould running normally or not, and whether the produced cap samples are fine or not. During the test, we will contect cooling water to simulate the state of conventional production to confirm all details of the mould, and mould we will put in suitable Ton machine. Meahwhile will take record of operate parameter and test report, if customer need relate data we will provide to them. One more point is if the test samples not good enough then workshop will adjust the mould till we get good samples and send to customer for check

Plastic Injection Mould

Plastic Cap Mould

Automotive Plastic Mould

Bottle Cap Mould

Medical Injection Mold

Home Appliance Mould

Cosmetic Injection Moulding

Custom Injection Mold

Plastic Bottle Mould

Customized Jerrycan Blow Mold

Plastic Blow Mould

Custom Blow Mold

China Yuyao Jinqiu Plastic Mould Co., Ltd. Company Cases